KMF Profile Index

(Trunking System, Secure / Multikey)

Selects the Secure Key Management Facility (KMF) Profile to be used while operating in ASTRO OTAR (Over-The-Air-Rekeying) mode. This selection applies for the current Trunking System. All ASTRO OTAR parameters specified in the selected KMF profile then apply for the current Trunking System.

This field is invalid:

when this system references a Data Profile having a Data Profile Type of "Trunking", "Trunking & Broadband" or "Broadband Only",

AND

when the KMF IP Address field is set to "0.0.0.0".

When the ASTRO OTAR field is "Enabled" for the current Trunking System, Hardware Key Select values for this System use the Secure Hardware Encryption Key References List of the Secure KMF Profile selected in this KMF Profile Index field for the current Trunking System.

Be aware that the CPS is actually pointing to the Keys of the Encryption Key List for this selection; individual Keys from the Secure Hardware Encryption Key References List reference the Encryption Key List's Keys from the Hardware Key Reference field. Therefore any key selected when ASTRO OTAR is enabled, must first be defined in the Secure Hardware Encryption Key References List.

When the ASTRO OTAR field is "Disabled" for the current Trunking System, Hardware Key Select values are directly chosen from the Secure Wide Window's Encryption Key List.

When the Secure Operation field is set to "Hardware", and

when the OTAR Enable field is enabled, and

when the ASTRO OTAR Enable field is enabled, and

when the System Type is "ASTRO 25", and

when the ASTRO OTAR field is enabled, and

when the current Trunking System has a referenced Data Profile, and

when the radio is model / option capable.

Go to the Secure / Multikey Page